Acroprint Systems Support Knowledge Base

10115

By default, a normal day begins at exactly 12:00AM (midnight). However, some companies may have employees who work overnight shifts, their actual workday starting late in the day or evening and ending sometime on the next day. Day change offset can be used to move the employees´ workday change time backward or forward from midnight.

If you do NOT have employees that work through midnight, leave this setting at the default.

If your third shift employees begin working on Day 1 and end working on Day 2 and all hours are credited to Day 1, leave this setting at the default.

If your third shift employees begin working on Day 1 and end working on Day 2 and all hours are credited to Day 2, set the Day Change Offset to your shift start time minus your shift start round.

Example: If your Shift starts at 11:00 and you have a 30-minute round, you would set your Day Change Offset to 10:30pm.

Editing Day Change Offset

1. From the main window of the Attendance Rx Administrator, click the Setup icon or enter the View menu and choose Setup.
2. Move your cursor to the Day Change Offset. Change this value to the desired setting.
3. Select Save to save your changes. To quit without saving changes, select another option from the left hand navigation and select No in the Save Changes dialog box. To restore your original settings, click Refresh in the top right hand corner and select No in the Save Changes dialog box.

• Attendance Rx Product Family
• Ares IV / Ares Express
• Ares III
• ATR 20/20
• ATR9800
• PayTime

• Pendulum
• timeQplus V3 product suite
• timeQplus Biometric (V2)
• Time Q +Plus
• Time Q
• TimeStation PC / TSPC Network